If you manage or own a company, it's your responsibility to ensure all the relevant threats in your workplace are managed effectively to prevent injuries and property damage. Since electrical machines are common in all workplaces, it is vital to deter accidents. 

Indeed, some employees don't use high-voltage equipment at work, but that doesn't mean they cannot face hazards like an electrical shock. When you safeguard everyone's well-being, you will avoid paying for damages and compensations. This post will share practical ways to protect employees from electric shock.

Utilize Insulated Cables

One easy way to minimize electrocution at work is to buy the right type of cable. Ideally, you should purchase cables with resilient and thick insulation. Note that some equipment may not have lines with sufficient insulation, so you will need to replace those during installation or when rearranging the work equipment. 

Also, some cables may have good insulation, but they may get worn and break after years of use. Hiring a commercial electrician to examine the condition of each line will prevent electrocution. They will change out worn cords and replace them with well-insulated ones.

Get Proper PPE for Work

Another way to prevent electrocution is to ensure staff members wear protective clothing while working. The PPE should be rated for the correct voltage to prevent accidents. Shock-resistant PPE may include insulated clothing, rubber gloves, protective shoes, and eyewear. 

Since each PPE is specifically designed to protect the workers from a specific voltage, the team should have proper items for their particular job. You should also encourage them to inspect their PPE before they start working to look for spots where insulation is worn thin or a tear that may risk their safety.

Report Electric Hazards 

Sometimes electric shocks result from a form of failure like an exposed wire or wiring mistake. All employees should know that they are obligated to check their equipment cables regularly and report any issues. This will allow you to contact a commercial electrician to handle the problem before major accidents occur. The repair work will be less costly when your team spots the electrical issue in advance.

Perform Proper Equipment Grounding

Grounding all your electrical equipment will prevent electrical shock cases at work. This safety measure will create a low-resistance path that is connected to the earth, preventing voltage buildups. With proper grounding, you will eliminate any unwanted voltage and minimize electrocution. You may also use guarding as another protective measure to reduce electrical hazard risks.

Contact a company like T & T Electric Inc for more information.